Top Signs It’s Time to Reseal Your Concrete Surface

At Summit Coatings, we know how important it is to maintain your concrete surfaces, especially in Utah’s ever-changing climate. Whether it’s your driveway, patio, or garage, concrete can be susceptible to damage if not properly protected. Resealing your concrete surfaces is a critical step in maintaining their durability and appearance. If you’re wondering when to reseal concrete surfaces in Utah or how to tell if concrete needs resealing, here are the top signs to watch for that indicate it’s time to apply a fresh coat of sealer.

1. Visible Cracks or Damage

The appearance of cracks, chips, or surface damage is one of the clearest signs that your concrete needs resealing. Over time, exposure to the elements—especially moisture from rain or snow—can weaken the protective layer of your concrete sealer, allowing cracks to form.

If you notice cracks starting to appear or existing cracks expanding, resealing your concrete surface will help seal them up and prevent further damage. When to reseal concrete surfaces in Utah often comes down to the condition of the concrete, and cracks signal it’s time to take action.

2. Fading or Discoloration

Concrete surfaces exposed to the sun for extended periods are prone to fading and discoloration. Utah’s intense sun can break down the sealer, causing the concrete to lose its vibrant appearance.

If your driveway, patio, or garage floor looks dull and faded, how to tell if concrete needs resealing becomes clear—resealing the surface will restore the shine and protect it from UV rays. It will also maintain the color integrity of your concrete, keeping it looking fresh for years.

3. Water Penetration or Staining

One of the primary purposes of a concrete sealer is to prevent water from soaking into the surface. If you start noticing water pooling on the surface or staining that doesn’t come off with cleaning, it’s a strong indication that the sealer has worn away.

Water penetration can lead to more significant issues, such as mold growth, staining, or even freeze-thaw damage during colder months. Knowing when to reseal concrete surfaces in Utah is critical for preventing water-related damage. If your concrete isn’t repelling water as it should, it’s time for a reseal.

4. Dirt and Debris Sticking to the Surface

Concrete without a protective sealer can become porous, making it much easier for dirt, dust, and debris to cling to the surface. This can lead to a buildup of grime that’s hard to remove.

If you find that dirt and debris are sticking more than usual and regular cleaning doesn’t seem to help, it’s a sign that the sealer has worn off. Resealing your concrete will restore its smooth, non-porous surface, making it easier to clean and maintain. If you’re wondering how to tell if concrete needs resealing, this is one of the first indicators.

5. Pitting or Surface Erosion

Pitting, or small, shallow holes in the surface, can occur when the concrete loses its protective seal. This erosion is often caused by exposure to water, chemicals, or road salts. In Utah, where snow and road salt are common in winter, concrete surfaces can suffer significant wear if not properly sealed.

If your concrete feels rough or you notice pits forming, resealing is necessary to protect it from further erosion. When to reseal concrete surfaces in Utah depends on the degree of surface damage, but it’s best to act quickly to avoid more costly repairs.

6. Peeling or Flaking Surface

If you notice that the surface of your concrete is peeling or flaking, it’s a sign that the sealer has failed. Over time, weather conditions such as rain, UV rays, and temperature fluctuations can cause the sealer to break down, leading to peeling or flaking of the protective layer.

This damage exposes the concrete to moisture, staining, and wear. Knowing how to tell if concrete needs resealing is easy in this case—if you see peeling or flaking, it’s time to apply a fresh coat of sealer to protect the surface and restore its appearance.

7. Increased Maintenance Requirements

As concrete begins to lose its sealer, it becomes more difficult to maintain. You may find that you’re spending more time cleaning, pressure washing, or scrubbing your concrete surfaces. Without a proper seal, dirt, oil, and other stains penetrate deeper, making them harder to remove.

If you notice that you’re constantly cleaning and the surface is still not looking as good as it should, resealing your concrete will not only restore its appearance but also make it easier to maintain going forward. This is one of the key signs that it’s time to reseal your concrete surfaces. Knowing when to reseal concrete surfaces in Utah and how to tell if concrete needs resealing is essential to keeping your concrete surfaces looking great and functioning properly. At Summit Coatings, we specialize in concrete sealing services that protect your surfaces from the harsh Utah weather and extend the life of your driveway, patio, or garage floor. If you’ve noticed any of the signs mentioned above, it’s time to give us a call. Our team is here to ensure your concrete surfaces stay strong, durable, and beautiful for years to come.